SNMP Trap ID
50
CIM Information
Prefix:
PLAT
ID:
0228
User Response
1.
Check the device driver.
2.
Reinstall the device driver.
3. Update all device drivers to the latest level.
4. Update the firmware (UEFI and IMM).
•
806f0323-2101xxxx : Power cycle of system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName]. (IPMI Watchdog)
This message is for the use case when an implementation has detected a Power Cycle by Watchdog
occurred.
May also be shown as 806f03232101xxxx or 0x806f03232101xxxx
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix:
PLAT
ID:
0374
User Response
No action; information only.
•
806f040c-2001xxxx : [PhysicalMemoryElementName] Disabled on Subsystem
[MemoryElementName]. (DIMM 1)
This message is for the use case when an implementation has detected that Memory has been Disabled.
May also be shown as 806f040c2001xxxx or 0x806f040c2001xxxx
Severity
Info
Serviceable
Appendix A. Integrated Management Module II (IMM2) error messages
563
Summary of Contents for System x3500 M5 Type 5464
