Attention:
To avoid breaking the retaining clips or damaging the DIMM connectors, open and
close the clips gently.
DIMM
Alignment
slot
Retaining
clip
Alignment tab
Figure 174. DIMM installation
Step 6.
Touch the static-protective package that contains the DIMM to any unpainted metal surface on the
outside of the server. Then, remove the DIMM from the package.
Step 7.
Turn the DIMM so that the alignment slot align correctly with the alignment tab.
Step 8.
Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at the ends
of the DIMM connector (see “System-board internal connectors” on page 25) for the locations
of the DIMM connectors).
258
System x3500 M5 Installation and Service Guide
Summary of Contents for System x3500 M5 Type 5464
