Figure 176. Unlock retention latch
Step 4.
Grasp the flash device and pull to remove it from the connector.
Step 5.
Return the retention latch to the locked position by pulling it away from the system board.
Figure 177. Return retention latch to locked position
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing a USB embedded hypervisor flash device
Use this information to install a USB embedded hypervisor flash device.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To install a hypervisor flash device, complete the following steps.
Step 1.
Unlock and remove the left-side cover (see “Removing the left-side cover” on page 182).
Step 2.
Remove the air baffle (see “Removing the air baffle” on page 188).
Step 3.
Unlock the retention latch by pushing it down toward the system board.
260
System x3500 M5 Installation and Service Guide
Summary of Contents for System x3500 M5 Type 5464
