Lenovo System x3500 M5 Type 5464, Installation And Service Manual

Page: 25 / 1236

• The system might has performance de-gradation after 35°C /3000’.
• Under no circumstance can any combination of worst-case workload and configuration result design
exposure at 35°C. Redundant fan installed support to 40°C, and the system might result shutdown
when fan failed from 40°C to 45°C.
• If an NVIDIA Quadro M6000 24GB graphics processing unit (GPU) accelerator is installed, the ambient
temperature must not exceed 40°C (104°F). When the ambient temperature is over 35°C (95°F), the
redundant fan function is not supported due to thermal limitation.
Heat output:
Approximate heat output:
• Minimum configuration: 341 Btu per hour (100 watts)
• Maximum configuration: 6667 Btu per hour (1945 watts)
Electrical input:
• Sine-wave input (50/60 Hz) required
• For 550W/750W/900W Platinum power supplies:
– Input voltage low range:
– Minimum: 100 Vac
– Maximum: 127 Vac
– Input voltage high range:
– Minimum: 200 V ac
– Maximum: 240 V ac
• For 750W Titanium and 1500W Platinum power supplies:
– Input voltage range:
– Minimum: 200 V ac
– Maximum: 240 V ac
• Maximum Input kilovolt-amperes (kVA), approximately:
– Minimum: 0.10 kVA
– Maximum: 1.967 kVA
Notes:
1. Power consumption and heat output vary depending on the number and type of optional features
installed and the power-management optional features in use.
2. The noise emission level stated is the declared (upper limit) sound power level, in bels, for a
random sample of machines. All measurements are made in accordance with ISO 7779 and
reported in conformance with ISO 9296. Actual sound-pressure levels in a given location might
exceed the average values stated because of room reflections and other nearby noise sources.
The noise emission level stated in the declared (upper limit) sound-power level, in bels, for a
random sample of system.
What your server offers
The server uses the following features and technologies.
• Active Energy Manager
The Active Energy Manager solution is an Systems Director extension that measures and reports server
power consumption as it occurs. This enables you to monitor power consumption in correlation to
specific software application programs and hardware configurations. You can obtain the measurement
values through the systems-management interface and view them, using Systems Director. For more
information, including the required levels of Systems Director and Active Energy Manager, see the
Systems Director Information Center at http://pic.dhe.ibm.com/infocenter/director/pubs/index.jsp, or see
http://www.ibm.com/systems/software/director/resources.html.
Chapter 1
.
The Lenovo System x3500 M5 Type 5464 server
9