Lenovo System x3500 M5 Type 5464, Installation And Service Manual

Page: 255 / 1236

00
00
00
Release button
Figure 160. Open bezel
Step 11. Install the 2.5-inch hot-swap hard disk drives (see “Installing a 2.5-inch hot-swap hard disk
drive” on page 200).
Step 12. Close the bezel (see “Installing the bezel” on page 186).
Step 13. Install and lock the left-side cover (see “Installing the left-side cover” on page 183).
If you have replaced a server component or installed an optional device in the server, you need to reconnect
the power cords and all external cables, and turn on the server and peripheral devices.
Removing the 3.5-inch hard disk drive backplane
Use this information to remove the 3.5-inch hard disk drive backplane.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To remove a 3.5-inch hard disk drive backplane, complete the following steps.
Step 1. Unlock and remove the left-side cover (see “Removing the left-side cover” on page 182).
Step 2. Open the bezel door (see “Opening the bezel door” on page 179).
Chapter 6
.
Removing and replacing components
239