Step 5.
Install one drive retainer clip only to the left side of DVD drive, using the holes nearest the center of
the drive. For the part number of the drive retainer clip, see “Structural parts” on page 174.
0
0
00
00
00
0
0
DVD drive
Drive retainer clip
Figure 129. Install the drive retainer clip
Step 6.
Follow the instructions that come with the drive to set jumpers or switches, if there are any.
Note:
You might find it easier to install the new drive from the front and then attach the cables.
Step 7.
Align the DVD drive to the drive bay; then, slide the DVD drive into the drive bay until it clicks
into place.
0
0
00
00
00
0
0
DVD drive
Drive retainer clip
Figure 130. Slide the DVD drive into the drive bay
Step 8.
Connect power and signal cables to the drive and the connectors on the system board .(see
“Internal cable routing and connectors” on page 33 for more information).
Step 9.
Close the bezel (see “Installing the bezel” on page 186).
Step 10. Install and lock the left-side cover (see “Installing the left-side cover” on page 183).
210
System x3500 M5 Installation and Service Guide
Summary of Contents for System x3500 M5 Type 5464
