Step 7.
Install one drive retainer clip only to the left side of DVD drive, using the holes nearest the center of
the drive. For the part number of the drive retainer clip, see “Structural parts” on page 174.
0
0
00
00
00
0
0
DVD drive
Drive retainer clip
Figure 44. Install the drive retainer clip
Step 8.
Follow the instructions that come with the drive to set jumpers or switches, if there are any.
Note:
You might find it easier to install the new drive from the front and then attach the cables.
Step 9.
Align the rail on the DVD drive with the guides in the drive bay; then, slide the DVD drive into the
drive bay until it clicks into place.
0
0
00
00
00
0
0
DVD drive
Drive retainer clip
Figure 45. Slide the DVD drive into the drive bay
Step 10. Connect power and signal cables to the drive and the connectors on the system board (see
“Internal cable routing and connectors” on page 33 for more information).
Note:
In order to ensure that the ODD/DVD drive can eject smoothly and avoid damage, remove the bezel
filler. See Figure 35 “Remove the bezel filler” on page 49.
57
Summary of Contents for System x3500 M5 Type 5464
