Lenovo System x3500 M5 Type 5464 Installation And Service Manual Download Page 663

Page: 663 / 1236

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0176

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

5. Replace the hard disk drive that is indicated by a lit status LED.

•

806f070c-2001xxxx : Configuration Error for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]. (DIMM 1)

This message is for the use case when an implementation has detected a Memory DIMM configuration
error has been corrected.

May also be shown as 806f070c2001xxxx or 0x806f070c2001xxxx

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0126

User Response

Make sure that DIMMs are installed and following the memory population chart in the system
publication.

•

806f070c-2002xxxx : Configuration Error for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]. (DIMM 2)

This message is for the use case when an implementation has detected a Memory DIMM configuration
error has been corrected.

May also be shown as 806f070c2002xxxx or 0x806f070c2002xxxx

Appendix A. Integrated Management Module II (IMM2) error messages

647

Summary of Contents for System x3500 M5 Type 5464





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3500 M5 Type 5464

Reviews:

Brands by name

Popular brands

Lenovo System x3500 M5 Type 5464, Installation And Service Manual

Search results

Summary of Contents for System x3500 M5 Type 5464

Reviews:

Brands by name

Popular brands