Lenovo System x3500 M5 Type 5464 Installation And Service Manual Download Page 329

Page: 329 / 1236

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0017

User Response

Complete the following steps until the problem is solved:

1. Make sure that the correct login ID and password are being used.

2. Have the system administrator reset the login ID or password.

•

40000012-00000000 : Remote access attempt failed. Invalid userid or password received. Userid is

[arg1] from WEB browser at IP address [arg2]. ()

This message is for the use case where a remote user has failed to establish a remote control session
from a Web browser session.

May also be shown as 4000001200000000 or 0x4000001200000000

Severity

Info

Serviceable

Automatically notify support

Alert Category

System - Remote Login

SNMP Trap ID

CIM Information

Prefix:

IMM

ID:

0018

User Response

Make sure that the correct login ID and password are being used.

•

40000013-00000000 : Remote access attempt failed. Invalid userid or password received. Userid is

[arg1] from TELNET client at IP address [arg2]. ()

This message is for the use case where a user has failed to log in to a Management Controller from
a telnet session.

May also be shown as 4000001300000000 or 0x4000001300000000

Severity

Info

Serviceable

Automatically notify support

Appendix A. Integrated Management Module II (IMM2) error messages

313

Summary of Contents for System x3500 M5 Type 5464





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3500 M5 Type 5464

Reviews:

Brands by name

Popular brands

Lenovo System x3500 M5 Type 5464, Installation And Service Manual

Search results

Summary of Contents for System x3500 M5 Type 5464

Reviews:

Brands by name

Popular brands