H
Installation tool
Installation tool
Microprocessor
Microprocessor
Cover
Microprocessor Installation Tool A
Microprocessor Installation Tool B
Figure 200. Microprocessor installation tools
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To install a microprocessor and heat sink, complete the following steps.
Step 1.
Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention:
Do not allow the server to fall over.
Step 2.
Unlock and remove the left-side cover (see “Removing the left-side cover” on page 182).
Step 3.
Remove the air baffle (see “Removing the air baffle” on page 188).
Step 4.
Rotate the heat sink retention module release lever to the open position.
278
System x3500 M5 Installation and Service Guide
Summary of Contents for System x3500 M5 Type 5464
