Kyocera TASKalfa 356ci, Operation Manual

Page: 490 / 566

10-49
Troubleshooting > Adjustment/Maintenance
2
Display the screen.
1
[
System Menu
] key > [
Adjustment/Maintenance
] > "Tone Curve Adjustment" [
Next
]
2
Select [
Next
] of "Copy/Print (600dpi)" or "Print (1200dpi)" .
3
Adjust the tone curve.
1
Select [
Start
]. A pattern is printed.
Check that the number "1" is printed at the bottom of the pattern.
2
As shown in the illustration, place the printed side down on the platen with the edge with
the arrows toward the back.
3
Select [
Start
]. The pattern is read and adjustment begins.
The second pattern is output.
4
Check that the number "2" (to "3") is printed at the bottom of the pattern and repeat steps 2
to 3 twice to read patterns 2 and 3 in sequence.
5
Select [
OK
] in the adjustment end confirmation screen.
Drum Refresh
Remove image blur and white dots from the printout.
1
Display the screen.
[
System Menu
] key > [
Adjustment/Maintenance
] > "Drum Refresh" [
Next
]
2
Perform the drum refresh.
Select [
Start
]. "Drum Refresh" begins.
NOTE
Select "Print (1200dpi)" if you want to adjust the printed output tone in printer resolution
1200 dpi.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.