Kyocera TASKalfa 356ci Operation Manual Download Page 377

Page: 377 / 566

8-49

Setup and Registration (System Menu) > System Menu

Network Interface (Send)

[

System Menu

] key > [

System/Network

] > [

Network Interface (Send)

]

Security Level

[

System Menu

] key > [

System/Network

] > [

Security Level

]

Interface Block Setting

[

System Menu

] key > [

System/Network

] > [

Interface Block Setting

]

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.

NOTE

This function is displayed when the optional network interface kit or Wireless Network Interface Kit is installed.

Item

Description

Network Interface (Send)

Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.

Value

: Standard, Optional NIC

Item

Description

Security Level

Specify the security level.

Value

Low:

This mode is used during maintenance. Do not use normally.

High:

This is the security setting we recommend. Use this setting normally.

Very High: In addition to [High] setting, this setting disables the machine settings to be

changed from external command.

Item

Description

USB Host

This locks and protects the USB port (USB host).

Value

: Unblock, Block

USB Device

This locks and protects the USB interface connector (USB Device).

Value

: Unblock, Block

USB Storage

This locks and protects the USB memory slot.

Value

: Unblock, Block

NOTE

This function is available when USB Host is set to [

Unblock

Optional Interface 1

This locks and protects the optional interface slots.

Value

: Unblock, Block

NOTE

You can set this feature for each slot.

Optional Interface 2

IMPORTANT

After changing the setting, restart the network or turn the machine OFF and then ON.

Summary of Contents for TASKalfa 356ci























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 356ci

Reviews:

Related manuals for TASKalfa 356ci

Brands by name

Popular brands

Kyocera TASKalfa 356ci, Operation Manual

Search results

Summary of Contents for TASKalfa 356ci

Reviews:

Related manuals for TASKalfa 356ci

Brands by name

Popular brands