Kyocera TASKalfa 356ci, Operation Manual

Page: 373 / 566

8-45
Setup and Registration (System Menu) > System Menu
Security Settings
LAN Interface
IPP over SSL
To use the IPP protocol, set [
IPP
] and [
SSL
] to [
On
]. The default port number is 443.
*1, *2
Value : Off, On
NOTE
When selecting [
On
], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
HTTP
Select whether to communicate using HTTP.
*1
Value : Off, On
HTTPS
Select whether to communicate using HTTPS.
*1, *2
Value : Off, On
LDAP
Select whether to use LDAP.
Value : Off, On
SNMPv1/v2c
Select whether to communicate using SNMP.
*1
Value : Off, On
SNMPv3
Select whether to communicate using SNMPv3.
*1
Value : Off, On
Enhanced WSD
Set whether to use our proprietary web services.
*1
Value : Off, On
NOTE
Selecting [
Off
] will disable the functionality of WIA, TWAIN, and Network FAX driver.
Enhanced WSD over SSL
Set whether to use our proprietary web services over SSL.
*1, *2
Value : Off, On
NOTE
Selecting [
Off
] will disable the functionality of WIA, TWAIN and Network FAX drivers.
eSCL
Selects whether to receive scanned documents using eSCL.
*1
eSCL over SSL
Selects whether to receive scanned documents using eSCL over SSL.
*1, *2
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [
On
] in Security Settings.
Security Settings (page 8-45)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL
Select whether to use SSL for communication.
Value : Off, On
Item Description
LAN Interface
Specify the settings for the LAN interface to be used.
Value : Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-T Half, 100BASE-TX Full, 1000BASE-T
Item Description