HP CC487-91209, Fax Manual, Page: 96 / 168

●
Fax Send Setup
●
General Fax Send Settings
3. Touch the PC Fax Send box.
4. Touch the Save button.
Fax header
Use the fax header feature to control whether the header is appended to the top, and content is
shifted down, or if the header is overlayed on top of the fax image.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
General Fax Send Settings
3. Touch the Prepend (default) or Overlay option in the Fax Header section to orientate the fax
header.
4. Touch the Save button.
Set the error correction mode
Normally, the fax accessory monitors the signals on the telephone line while it is sending or receiving
a fax. If the fax accessory detects an error during the transmission and the error correction setting is
on, the fax accessory can request that the error portion of the fax be sent again.
Error correction mode is enabled by default. You should turn off error correction only if you are having
trouble sending or receiving a fax and if you are willing to accept the errors in the transmission and a
probable quality reduction in the image. Turning off the setting might be useful when you are trying to
send a fax overseas or receive one from overseas, or if you are using a satellite telephone
connection.
If error connection mode is not enabled, it cannot work in fast mode. The fax will go 14,400 bps or
slower.
NOTE: Some VOIP providers may suggest turning error correction mode off. However, this is not
usually necessary.
If error correction mode is disabled, follow these steps to enable:
1. From the Home screen, scroll to and touch the Administration button
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
84 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP
Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,
and HP LaserJet Enterprise M725 MFP Series
ENWW