manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 29 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 29

Set the redial interval

The redial interval setting selects the number of minutes between retries if the number dialed is busy

or not answering. Busy can also indicate a communication error.

NOTE:

You might observe a redial message on the control panel when both the Redial-on-Busy,

Redial-on-No-Answer, and Redial-on-Error settings are set to off. This occurs when the fax accessory

dials a number, establishes a connection, and then loses the connection. As a result of this error

condition, the fax accessory performs two automatic redial attempts regardless of the redial settings

(the first one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation,

a message appears on the control panel to indicate that a redial is in progress.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to touch 

Initial Setup

 to open the initial setup menu.

3.

Touch 

Fax Setup

 to open the fax setup menu.

4.

Touch 

Fax Send Settings

 and use the down arrow key to scroll to 

Redial Interval

.

5.

Touch the text box to display the keyboard.

6.

Enter the value (1–5) and touch 

OK

.

7.

Touch 

Save

.

Set redial-on-busy

The redial-on-busy setting selects the number of times (0 through 9) the fax accessory redials a

number when the number is busy. The interval between retries is set by the Redial Interval setting.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to touch 

Initial Setup

.

3.

Scroll to touch 

Fax Setup

.

4.

Touch 

Fax Send Settings

 and use the down arrow key to scroll to 

Redial On Busy

.

5.

Touch the text box to display the keyboard.

6.

Enter the value (0–9) and touch 

OK

.

7.

Touch 

Save

.

Set redial-on-no-answer

The redial-on-no-answer setting selects the number of times the fax accessory redials if the number

dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending

on the country/region setting. The interval between retries is set by the redial interval setting.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to touch 

Initial Setup

 to open the initial setup menu.

3.

Scroll to touch 

Fax Setup

 to open the fax setup menu.

ENWW

Fax settings 17

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments