manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 38 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 38

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Optimize Text/Picture

3.

Touch one of the following options:

●

Manually adjust

 (default)

●

Text

●

Printed picture

●

Photograph

4.

Touch the 

Save

 button.

Job build

Use the Job build feature to combine multiple originals into a single fax job.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Job Build

3.

Touch one of the following options:

●

Job Build off

 (default)

●

Job Build on

4.

Touch the 

Save

 button.

Blank page suppression

Use the Blank page suppression feature to prevent blank pages in a fax from being printed.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

26 Chapter 2   HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments