manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 30 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 30

4.

Touch 

Fax Send Settings

 and use the down arrow key to scroll to 

Redial On No Answer

.

5.

Touch 

Never

 or 

Once

.

6.

Touch 

Save

.

Set the dial tone detection

The detect dial tone setting determines whether the fax checks for a dial tone before sending a fax.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to touch 

Initial Setup

 to open the initial setup menu.

3.

Touch 

Fax Setup

 to open the fax setup menu.

4.

Touch 

Fax Send Settings

 and use the down arrow key to scroll to 

Detect Dial Tone

.

5.

Touch 

Enabled

 (default) to enable dial tone detection, or touch 

Disabled

 to disable dial tone

detection.

Set the overlay header (outgoing faxes)

The header consists of the date, time, company name, phone number, and page number and is

printed at the top of the page on outgoing faxes. This setting determines whether the header is

appended to the top of the page or is printed as an overlay. If the header is appended to the top of a

page, it moves page data down which can result in data at the bottom of a page being pushed to

another page, possibly printing an additional page. If the header is printed as an overlay, it does not

push any page data, but might print over the header at the top of the page.

NOTE:

When fax forwarding is enabled, the header is always appended to the top of the page, even

if overlay is enabled.

1.

On the control panel, touch the 

Administration

 icon to open the Administration menu.

2.

Scroll to and touch 

Default Job Options

3.

Scroll to and touch 

Default Fax Options

.

4.

Scroll to and touch 

Fax Send

.

5.

Touch 

Fax Header

 to see the header settings.

6.

Touch 

Overlay

 to print the header as an overlay, or touch 

Prepend

 (default) to append the

header to the top of the page.

7.

Touch 

Save

.

Set a dialing prefix

The dialing prefix setting allows you to enter a prefix number (such as a "9" to access an outside line)

when dialing. This prefix number is automatically added to all phone numbers when dialed.

NOTE:

You might need a pause between the prefix and the phone number. To insert a 2–second

pause, enter a comma (,).

18 Chapter 2   HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments