HP CC487-91209 Fax Manual Download Page 51

Page: 51 / 168

Cancel a fax

Press the red Stop button on the control panel. The

Job Status

screen opens.

NOTE:

A short delay might occur before the job displays in the list of jobs on the

Job Status

screen after the fax job has finished scanning.

Touch the drop-down menu, and touch the

Outgoing faxes

option.

Select either the

Current Fax Job

tab or the

All Fax Jobs

tab, and then select the name of the

job. Touch the

Cancel Job

button.

Create or delete speed dial lists

Speed dial allows you to assign a speed dial name to a single number or a group of numbers and

then send a fax to that number or numbers by selecting the speed dial name.

Create a speed dial list

On the control panel, touch the

Fax

icon to display the Fax screen.

Touch

Speed Dials

to display the Speed Dial screen.

Touch a

Speed Dial Number

Touch the

Speed Dial Name

box to display the keyboard.

Type a name for the speed dial and touch

to return to the

Speed Dials

screen.

Touch the

Fax Numbers

box to display the keyboard.

Type a fax number for the

Speed Dial Name

and touch

to return to the

Speed Dials

screen.

Touch the

Speed Dial

number selected for the Speed Dial Name to save. The name and fax

number will appear next to the

Speed Dial Number

Repeat steps 3-8 to enter all the numbers for the speed dial

10.

When finished, press

to return to the Fax screen

Delete a speed dial list

On the control panel main screen, touch the

Fax

icon to display the Fax screen.

Touch

Speed Dial

to display the Speed Dial screen.

Touch a

Speed Dial

number of the list to be deleted.

Touch

Delete

The next screen will ask to confirm the deletion.

Touch

Yes

to delete the speed dial list.

Touch

Yes

again to return to the Fax screen.

ENWW

Use fax 39

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 51 / 168

Search results

Summary of Contents for CC487-91209

Reviews: