HP CC487-91209 Fax Manual Download Page 28

Page: 28 / 168

Fax settings

The following sections detail the various settings for sending and receiving faxes.

●

Send fax settings

●

Receive fax settings

●

Fax archive and forwarding

Send fax settings

Use the Fax Send Setup menu to configure the following features:

●

Fax dialing settings

●

General fax settings

●

Default job options

Fax dialing settings

Set the modem volume

On the control panel, scroll to and touch the

Administration

icon to open the Administration

menu.

Scroll to and touch

Initial Setup

to display the Initial Setup menu.

Touch

Fax Setup

to display the Fax Setup menu.

Touch

Fax Send Settings

to display the Fax Send Settings menu.

Touch

Fax Dial Volume

to display the Fax Dial Volume menu.

Touch

Off

;

Low

(default), or

High

to set the volume.

Touch

Save

to save the volume setting.

Set the dialing mode

The dialing mode setting sets the type of dialing that is used: either tone (touch-tone phones) or pulse

(rotary-dial phones).

To set the dialing mode, perform the following steps.

On the control panel, scroll to and touch the

Administration

icon to open the Administration

menu.

Scroll to touch

Initial Setup

to open the initial setup menu.

Touch

Fax Setup

to open the fax setup menu.

Touch

Fax Send Settings

and use the down arrow key to scroll to

Dialing Mode

Touch

Dialing Mode

to see the dialing mode settings.

Touch

Tone

(default) to set the fax for tone dialing, or touch

Pulse

to set the fax for pulse dialing.

Touch

Save

16 Chapter 2 HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 28 / 168

Search results

Summary of Contents for CC487-91209

Reviews: