HP CC487-91209 Fax Manual Download Page 36

Page: 36 / 168

●

Do not notify

(default)

●

Notify when job completes

●

Notify only if job fails

Touch the

option to receive a printed notification, or touch the

E-mail

option to receive an e-

mail notification.

If you selected the

option, touch the

Save

button to complete the notification setup.

-or-

If you selected the

E-mail

option, use the keyboard to type an e-mail address. Then touch the

button to complete the notification setup.

Touch the

Include Thumbnail

check box to include a thumbnail image with notifications.

Content orientation

Use the content orientation feature to set how the fax content is oriented on the page. For 1–sided

pages, choose Portrait (short-edge on top, default setting) or Landscape (long-edge on top). For 2–

sided pages, choose Book-style (short-edge on top) or Flip-style (long-edge on top).

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Content Orientation

Touch

Portrait

(default) or

Landscape

for

1-sided

pages.

Touch

Book-style

Flip-style

for

2-sided

pages.

Touch the

Save

button.

Original size

Use the Original size feature to match your fax content to the size of the original document.

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Original Size

Touch one of the following options:

24 Chapter 2 HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 36 / 168

Search results

Summary of Contents for CC487-91209

Reviews: