manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 108 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 108

6.

Touch the OK button to save the changes.

7.

Touch the Start button to begin scanning.

Automatic tone adjustment

You can configure the product to automatically adjust the darkness, contract, and background

cleanup settings on a page-by-page basis. For example, if the original document has some pages

that are lighter than others, the resulting scanned image has a more uniform darkness setting for all

pages.

1.

From the Home screen, touch the Fax button.

2.

Complete the fields on the first screen to specify the fax recipient information.

3.

Touch the More Options button at the bottom of the screen.

4.

Touch the Image Adjustment button.

NOTE:

If the Image Adjustment button is not on the first page of options, touch the More

Options button again to scroll to the next page.

5.

Touch the Automatic Tone check box to select it.

6.

Touch the OK button to save the changes.

7.

Touch the Start button to begin scanning.

Enable or disable the fax printing schedule

NOTE:

Before enabling a fax-printing schedule, a schedule must be created.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Fax Printing Schedule

3.

Touch the 

Use Fax Printing Schedule

 option.

4.

Touch the 

Schedule

 button.

5.

Touch 

Fax Printing Mode

.

6.

Touch the green plus sign to open the 

Schedule a Weekly Fax Event

 screen.

7.

Scroll to and touch 

Fax Printing Mode

.

8.

Select an option under the 

Event Type

 heading:

●

Print incoming faxes

●

Store incoming faxes

9.

Touch the 

Time

 fields to open the keypad and then enter the hour and minute values when

incoming faxes will be printed or stored.

96 Chapter 3   HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments