HP CC487-91209 Fax Manual Download Page 115

Page: 115 / 168

Use fax

Fax feature screen

The Fax feature screen is used to send faxes. To access this screen, press the

Fax

icon displayed on

the control panel Home screen.

Home Key - return to main screen

Send Fax - press to send fax to recipients

Backspace/Delete Number

Enter Number into Recipient List

Status Message Bar

Access fax address book

Speed Dial Search by Number

Image Preview

Help - touch to display help selections

Speed Dial - Edit Key

Speed Dial - Search by Name

Speed Dial List (scroll to display other entries)

More Options – touch to view or set other fax sending options.

Press for Details of Selected Recipient

Press to Delete Selected Recipient from List

Fax Recipients

Fax Number

- Touch for keyboard or enter from control panel keypad

When the

Fax Number

is touched, a pop up is displayed which includes the

button for adding

special character brackets ([ ]) to hide a PIN, and a

Pause

button to insert a comma for a two second

pause.

NOTE:

The PIN is for calling card numbers, not for the security of faxed documents.

ENWW

Use fax 103

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 115 / 168

Search results

Summary of Contents for CC487-91209

Reviews: