manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 117 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 117

or 0), or a long-distance prefix. A two second pause may be included by typing a comma (,). If the fax

prefix setting has been set to automatically include the dialing prefix, you will not need to enter it.

NOTE:

When a fax is sent, it is first scanned and stored into memory. After the entire document is

stored, it is sent and then deleted from memory. Faxes that fail to send, because the number was

busy or did not answer, are deleted from memory. If the 

Redial On Busy

 or 

Redial On No Answer

features are set, the fax will not be deleted until all retries fail or the fax is sent successfully.

Send a fax by entering numbers manually

1.

Place the document in the automatic

document feeder (ADF) or on the scanner

glass.

 

2.

From the Home screen, touch the 

Fax

 button.

You may be prompted to type a user name

and password.

 

3.

Touch the 

More Options

 button. Verify that

the settings match those of your original.

When all settings are completed, touch the up

arrow to scroll to the main 

Fax

 screen.

 

4.

Touch the 

Fax Number

 box to open the

keypad.

 

ENWW

Use fax 105

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments