HP CC487-91209 Fax Manual Download Page 112

Page: 112 / 168

●

Automatic

(default)

●

Tray 1

●

Tray 2

Touch the

Save

button.

Set the output bin

Use the Output bin feature to set which output bin to use for outputting the fax.

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Output Bin

Touch the bin to use for your received faxes.

Touch the

Save

button.

Set the sides

Use the Sides feature to specify 1–side or 2–sided output for faxes.

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Sides

Touch one of the following options:

●

1-sided

(default)

●

2-sided

Touch the

Save

button.

Set the paper tray

The paper tray setting selects the product paper tray to pull paper from for printing faxes.

From the Home screen, scroll to and touch the

Administration

button.

Open the following menus:

100 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 112 / 168

Search results

Summary of Contents for CC487-91209

Reviews: