manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 34 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 34

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to and touch 

Initial Setup

 and then 

Fax Setup

 to open the fax menu.

3.

Touch 

Fax Send Settings

 to see the Fax Send settings.

4.

Scroll to and touch 

Billing Codes

 to see the billing code settings.

5.

Touch 

Custom

 to enable billing codes.

NOTE:

If you want to disable billing codes, touch 

Off

, touch 

Save

, and then skip the remaining

steps.

6.

Touch 

Save

 to open the Billing Code screen.

7.

Touch the text box to display the keyboard.

8.

Type the minimum number of digits you want in the billing code, and then touch 

OK

.

9.

Touch 

Save

.

Default job options

The following default job options are available for configuration:

●

Image Preview

●

Resolution

●

Original Sides

●

Notification

●

Content Orientation

●

Original Size

●

Image Adjustment

●

Optimize Text/Picture

●

Job Build

●

Blank Page Suppression

NOTE:

Default job option settings are shared across all fax methods; analog, LAN, and internet fax.

Set the outgoing fax resolution

The outgoing fax resolution setting determines the maximum resolution supported by the receiving

fax. The fax accessory uses the highest possible resolution (as limited by this setting) and the

maximum resolution of the receiving fax.

NOTE:

Faxes wider than 21.25 cm (8.5 inches) are automatically sent by using standard or fine

resolution, to reduce phone time.

NOTE:

The default resolution setting is a lower dpi than previous product model default resolution

settings. For example, previous product models had a default resolution of FINE (200 x 200 dpi).

22 Chapter 2   HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments