manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 39 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 39

●

Default Job Options

●

Blank Page Suppression

3.

Touch one of the following options:

●

Disabled

 (default)

●

Enabled

4.

Touch the 

Save

 button.

Receive fax settings

Use the Fax Receive Setup menu to configure the following features:

●

Fax receive setup

●

Enable or disable the fax printing schedule

●

Block incoming faxes

●

Initiate polling receive

●

Default job options

●

Set the paper tray

Fax receive setup

Set the ringer volume

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to and touch 

Initial Setup

 to display the Initial Setup menu.

3.

Touch 

Fax Setup

 to display the Fax Setup menu.

4.

Touch 

Fax Receive Settings

 to display the Fax Receive Settings menu.

5.

Touch 

Ringer Volume

 to display the Ringer Volume menu.

6.

Touch 

Off

; 

Low

 (default), or 

High

 to set the volume.

7.

Touch 

Save

 to save the volume setting.

Enable or disable the fax printing schedule

NOTE:

Before enabling a fax-printing schedule, a schedule must be created.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to and touch 

Time/Scheduling

 to display the Time/Scheduling screen.

3.

Scroll to and touch 

Fax Printing

 to display the PIN menu.

4.

Touch the text box to display the keyboard.

ENWW

Fax settings 27

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments