HP CC487-91209 Fax Manual Download Page 107

Page: 107 / 168

Select a color setting from the list of options.

Touch the OK button to save the changes.

Touch the Start button to begin scanning.

Automatic page cropping

The product can crop the scanned image so that it is the same size as the paper for the original

document, or it can crop the image to the size of the detectable content from the original document.

NOTE:

To crop the image to match the paper size, scan from the document feeder or leave the

scanner lid open when scanning from the flatbed glass.

From the Home screen, touch the Fax button.

Complete the fields on the first screen to specify the fax recipient information.

Touch the More Options button at the bottom of the screen.

Touch the Cropping Options button.

NOTE:

If the Cropping Options button is not on the first page of options, touch the More

Options button again to scroll to the next page.

Select the appropriate cropping option:

●

Crop to paper: The product crops the image to match the paper size of the original

document.

●

Crop to content: The product crops the image to the size of the detectable content in the

original document.

Touch the OK button to save the changes.

Touch the Start button to begin scanning.

Automatic image orientation

For original documents that have at least 100 characters of text on the page, the product can detect

which edge is the top of the page, and it orients the scanned images appropriately. If you scan

several pages and some of the pages are upside-down in relation to other pages, the resulting

scanned image has all pages right-side-up. If some of the pages have landscape orientation, the

product rotates the image so that the top of the page is at the top of the image.

From the Home screen, touch the Fax button.

Complete the fields on the first screen to specify the fax recipient information.

Touch the More Options button at the bottom of the screen.

Touch the Content Orientation button.

NOTE:

If the Content Orientation button is not on the first page of options, touch the More

Options button again to scroll to the next page.

Select the Automatically detect option.

ENWW

Fax settings 95

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 107 / 168

Search results

Summary of Contents for CC487-91209

Reviews: