manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 35 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 35

NOTE:

The higher the resolution, the longer the transmission time required.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Touch 

Default Job Options

.

3.

Touch 

Default Fax Options

.

4.

Scroll to and touch 

Fax Send

.

5.

Touch 

Resolution

 to see the resolution settings.

6.

Touch 

Standard

 (200 x 100 dpi, default), 

Fine

 (200 x 200 dpi), or 

Superfine

 (300 x 300 dpi) to

select the resolution.

7.

Touch 

Save

.

Original sides

1.

From the Home screen, scroll to and touch the 

Administration

 icon.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Original Sides

3.

Touch one of the following options:

●

1-sided

 (default)

●

2-sided

4.

Touch the 

Orientation

 button to set the page orientation.

5.

Touch the 

Save

 button.

Notification

Notification selects when and how you are notified of the status of an outgoing fax. This setting

applies to the current fax only. To change the setting permanently, change the default setting.

1.

From the Home screen, touch the Administration icon.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Notification

3.

Touch one of the following notification settings:

ENWW

Fax settings 23

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments