HP CC487-91209 Fax Manual Download Page 106

Page: 106 / 168

Touch the OK button to save the changes.

Touch the Start button to begin scanning.

Erase edges

Use the Erase Edges feature to remove blemishes, such as dark borders or staple marks, by cleaning

the edges of the scanned image.

From the Home screen, touch the Fax button.

Complete the fields on the first screen to specify the fax recipient information.

Touch the More Options button at the bottom of the screen.

Touch the Erase Edges button.

NOTE:

If the Erase Edges button is not on the first page of options, touch the More Options

button again to scroll to the next page.

If necessary, change the unit of measure by selecting the Use inches box or the Use millimeters

box.

Touch the field for an edge of the image that you want to clean, and then enter the distance from

the edge of the page to clean. Repeat this step for each edge that you want to clean.

Touch the OK button to save the changes.

Touch the Start button to begin scanning.

Automatic color detection

Use the Color/Black feature to configure the color settings that the product uses for scanned images.

The following options are available:

Auto detect

The product previews the images and determines whether

the pages contain color. If the pages have color, the product

creates a color image. If the pages do not have color, the

product creates a black image or a grayscale image. Black

and grayscale images have a smaller file size than color

images.

Color

The product always creates a color image.

Black/Gray

The product always creates an image in black and grayscale.

Black

The product always creates an image in black only, with no

shades of gray.

From the Home screen, touch the Fax button.

Complete the fields on the first screen to specify the fax recipient information.

Touch the More Options button at the bottom of the screen.

Touch the Color/Black button.

NOTE:

If the Color/Black button is not on the first page of options, touch the More Options

button again to scroll to the next page.

94 Chapter 3 HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 106 / 168

Search results

Summary of Contents for CC487-91209

Reviews: