manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 37 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 37

●

Any size (default)

●

Letter

 (8.5x11)

●

Mixed Letter/Legal

●

Legal (8.5 x 14)

●

Executive (7.25 x 10.5)

●

Statement (8.5 x 5.5)

●

Oficio (8.5 x 13)

●

A4 (210x297 mm)

●

A5 (148x210 mm)

●

B5 (257x182 mm)

●

16k (197x273 mm)

●

DPostcard JIS (148x200 mm)

●

Oficio (216 x 340 mm)

4.

Touch the 

Save

 button.

Image adjustment

NOTE:

Adjusting image settings can slow down the fax transfer speed and result in longer

transmission times.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Image Adjustment

3.

Touch the 

Lighter

 or 

Darker

 buttons to adjust the 

Darkness

 setting.

4.

Touch the 

Less

 or 

More

 buttons to adjust the 

Contrast

, 

Background Cleanup

, or 

Sharpness

settings.

5.

Touch the 

Save

 button.

NOTE:

Touch the 

Default

 button to reset the sharpness setting to the factory setting.

Optimize text/picture

Use the Optimize text/picture feature to produce fax output that best matches the original. Sending

graphics and photos in text mode results in lower quality images.

ENWW

Fax settings 25

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments