manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 120 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 120

Touch the 

OK

 button when the message Job has been aborted. displays.

Touch the 

OK

 button to finish canceling the fax job and return to the fax screen.

Cancel pending faxes

1.

From the Home screen, scroll to and touch the 

Job Status

 button.

2.

Touch the fax job to cancel on the 

Job Status

 screen.

3.

Touch the 

Cancel Job

 button.

4.

Touch the 

Yes

 button on the screen with the message Are you sure you want to cancel this job?

displays.

NOTE:

The cancel operation may require up to 30 seconds to complete.

Receive faxes

When the fax accessory receives incoming faxes, it stores them in memory before printing. After the

entire fax is stored, it is printed and then deleted from memory. Faxes print when received unless

Schedule Printing of Faxes is enabled. If Schedule Printing of Faxes is enabled, all incoming faxes

are stored in memory and not printed. When Schedule Printing of Faxes is disabled, all stored faxes

print.

You can change the fax-receive default settings to modify the way a fax is received. These settings

include the following options:

●

Selecting the number of rings-to-answer

●

Printing date, time, and page number on faxes (stamp)

●

Selecting input paper tray and destination bin

●

Forwarding faxes to another number

●

Blocking faxes from certain numbers

●

Schedule the printing of faxes (memory lock)

●

Notification settings (HP Color LaserJet CM3530 MFP Series)

Create or delete speed dial lists

Speed dial allows you to assign a speed dial name to a single number or a group of numbers and

then send a fax to that number or numbers by selecting the speed dial name.

Create a speed dial list

1.

From the Home screen, scroll to and touch

the 

Fax

 button.

 

108 Chapter 3   HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments