manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 139 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 139

Billing code report

The billing code report is a list of the most recent 500 faxes that were successfully sent, listed by

billing code. The following information is provided in this report.

●

Billing code number

●

Date and time of all faxes that were successfully sent

●

Identification number

●

Duration (off hook time)

●

Number of pages sent

●

Result (success)

The database stores the most recent 500 faxes (older faxes are deleted from the database). If you

want to use the report for record keeping purposes, you should print the report periodically (at least

every 500 faxes) and then clear it.

Blocked fax list report

The blocked fax list report contains the list of fax numbers that the product has been configured to not

receive faxes from.

Speed dial list report

A speed dial list report lists the fax numbers assigned to speed dial names.

Fax call report

The fax call report is a brief report that indicates the status of the last fax that was sent or received.

Clear the fax activity log

To clear the fax activity log, complete the following steps.

1.

On the control panel, touch the 

Administration

 icon.

2.

Open the following menus:

●

Fax Settings

●

Clear fax activity log

3.

Touch the 

Clear

 button to clear the fax activity log.

Service settings

These items in the control-panel menus can help with troubleshooting if the corrective action taken

under the Error Codes section is unsuccessful. They are intended to be used when an HP service

representative is assisting you.

Settings in the Troubleshooting menu

Open the 

Administration

 menu, and then select the 

Troubleshooting

 menu.

ENWW

Solve fax problems 127

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments