manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 64 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 64

Print the fax activity log

The fax activity log includes the following information.

●

Date and time of all faxes received, sent, or failed to send

●

Identification (phone number, if available)

●

Duration (off-hook time)

●

Number of pages

●

Result (successfully sent, pending, or failed to send which includes error type and code)

The database stores the most recent 500 fax entries (older faxes are deleted from the log). The

database fax entries include any fax session as an entry. For example, a fax session could be a sent

fax, received fax, or firmware upgrades. Depending on the activity, there might be fewer than 500

entries in the report (unless you sent 500 faxes without receiving any faxes or other completing

another activity).

If you want to use the log for record keeping purposes, you should print the log periodically (at least

every 500 faxes) and then clear it.

To print the fax activity log, complete the following steps.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to and touch 

Information

.

3.

Scroll to and touch 

Fax Reports

 then 

Fax Activity Log

. (Prints report)

Print the billing code report

The billing code report is a list of the most recent 500 faxes that were successfully sent, listed by

billing code. The following information is provided in this report.

●

Billing code number

●

Date and time of all faxes that were successfully sent

●

Identification number

●

Duration (off hook time)

●

Number of pages sent

●

Result (success)

The database stores the most recent 500 faxes (older faxes are deleted from the database). If you

want to use the report for record keeping purposes, you should print the report periodically (at least

every 500 faxes) and then clear it.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Scroll to and touch 

Information

.

3.

Scroll to and touch 

Fax Reports

.

52 Chapter 2   HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments