HP CC487-91209 Fax Manual Download Page 125

Page: 125 / 168

Touch the down arrow on the

Speed Dial

Name

box to open the drop down menu.

Touch the

Fax Numbers

item.

To add a fax number for a speed dial name,

touch the screen to the right of the last digit of

the last fax number in the list. When the

cursor appears, touch the enter key

to move the cursor to the next

line and then type the fax number.

Touch the

button to return to the

Speed

Dials

screen.

Touch the

button to return to the

Fax

screen.

Voice Calls and Retries

Fax Call Report

A Fax Call Report is printed when the Notification feature has been enabled in the Default Job

Options or More Options menu.

When all fax attempts have been exhausted, a Fax Call Report will be printed for a fax send. It shows

the fax job log ID. The result of the final attempt is printed on the Fax Call Report.

A Fax Call Report does not print for calls assumed to be voice calls. To view detailed fax call reports,

see the log selection in the Troubleshooting menu.

ENWW

Use fax 113

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 125 / 168

Search results

Summary of Contents for CC487-91209

Reviews: