manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 110 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 110

Default job options

The following default job options are available for configuration:

●

Notification

●

Stamp Received Faxes

●

Fit to Page

●

Paper Selection

●

Output Bin

●

Sides

NOTE:

Default job option settings are shared across all fax methods; analog, LAN, and internet fax.

Notification

This setting controls when the fax call report is printed for incoming faxes.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Notification

3.

Touch one of the following notification settings:

●

Do not notify

 (default)

●

Notify when job completes

●

Notify only if job fails

4.

Touch the 

Print

 option to receive a printed notification, or touch the 

E-mail

 option to receive an e-

mail notification.

5.

If you selected the 

Print

 option, touch the 

Save

 button to complete the notification setup.

-or-

If you selected the 

E-mail

 option, use the keyboard to type an e-mail address. Then touch the

Save

 button to complete the notification setup.

6.

Touch the 

Include Thumbnail

 check box to include a thumbnail image with notifications.

Stamp received faxes (incoming faxes)

The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the

received date, time, phone number, and page number on each incoming page.

98 Chapter 3   HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments