manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 43 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 43

5.

Touch 

Disabled

 (default) to disable the stamp, or touch 

Enabled

 to enable the stamp.

6.

Touch 

Save

.

Set fit-to-page

When selecting a page size to print a fax, the product determines the closest page size that matches

the intended size from sizes available in the product. If the fit-to-page setting is enabled and the

received image is larger than that page size, the product attempts to scale the image to fit the page. If

this setting is disabled, an incoming image larger than the page splits across pages.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Touch 

Default Job Options

 and then 

Default Fax Options

.

3.

Scroll to and touch 

Fax Receive

 to see the Fax Receive setting.

4.

Touch 

Fit to Page

 to see the fit-to-page settings.

5.

Touch 

Enabled

 (default) to enable fit-to-page, or touch 

Disabled

 to disable fit-to-page.

6.

Touch 

Save

.

Set the paper tray

The paper tray setting selects the product paper tray to pull paper from for printing faxes.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Touch 

Default Job Options

.

3.

Touch 

Default Fax Options

.

4.

Touch 

Fax Receive

 to display the Fax Receive menu.

5.

Touch 

Fax Paper Tray

 to display the Fax Paper Tray menu.

6.

Touch the name of the tray to use for received faxes.

7.

Touch 

Save

 to save the paper tray value.

Fax archive and forwarding

Use the fax archive feature to save archival copies of all incoming faxes, all outgoing faxes, or both,

to a specified email address.

Use the fax forwarding feature to forward all received faxes, all outgoing faxes, or both, to another fax

number. When fax forwarding is enabled, the receiving product prints the fax (if fax printing is

disabled, the fax prints when the printing is enabled), and also forwards the fax to the fax forward

number.

NOTE:

To use the Archive to Email Address feature, the SMTP server must be configured, and

responding, on the product. For information about configuring the SMTP server, see the product user

guide.

ENWW

Fax settings 31

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments