manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 111 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 111

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Stamp Received Faxes

3.

Touch the 

Disabled

 option (default) to disable the stamp, or touch the 

Enabled

 option to enable

the stamp.

4.

Touch the 

Save

 button.

Set fit-to-page

When selecting a page size to print a fax, the product determines the closest page size that matches

the intended size from sizes available in the product. If the fit-to-page setting is enabled and the

received image is larger than that page size, the product attempts to scale the image to fit the page. If

this setting is disabled, an incoming image larger than the page splits across pages.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Fit to Page

3.

Touch the 

Enabled

 option (default) to enable fit-to-page, or touch the 

Disabled

 option to disable

fit-to-page.

4.

Touch the 

Save

 button.

Set the paper selection

Use the paper selection feature to specify which tray the paper for the fax is loaded from.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Default Job Options

●

Paper Selection

3.

Touch one of the following options:

ENWW

Fax settings 99

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments