HP CC487-91209 Fax Manual Download Page 33

Page: 33 / 168

Change the light/dark setting

The light/dark setting adjusts how light or dark the transmitted image appears on the recipient fax

machine. Adjusting the light/dark setting can increase resolution which also increases transmission

time.

On the control panel, touch the

Fax

icon to display the Fax screen.

Scroll to and touch

More Options

Scroll to and touch

Image Adjustment

Under the

Darkness

heading, touch the left arrow to make the image lighter and touch the right

arrow to make the image darker.

Touch

to accept the setting.

Activate Fax Number Speed Dial Matching

If this feature is enabled, the product tries to match any fax number entered with existing entries in

the speed dial list. If a match is found, you can confirm the match and have the product complete the

faxing action automatically. The default setting for this feature is

Disabled

On the control panel, touch the

Administration

icon to open the Administration menu.

Scroll to and touch

Initial Setup

and then

Send Setup

Scroll to and touch

Fax Number Speed Dial Matching

Touch

Enabled

Touch

Save

Set the error correction mode

Normally, the fax accessory monitors the signals on the telephone line while it is sending or receiving

a fax. If the fax accessory detects an error during the transmission and the error correction setting is

on, the fax accessory can request that the error portion of the fax be sent again.

If error connection mode is not enabled, it cannot work in fast mode. The fax will go 14,400 bps or

slower.

On the control panel, scroll to and touch the

Administration

icon to open the Administration

menu.

Touch

Initial Setup

to open the setup settings menu and then touch

Fax Setup

Touch

Fax Send Settings

to see the settings.

Touch

Error Correction Mode

to see the settings.

Touch

Enabled

(default) to enable error correction mode, or touch

Disabled

to disable correction

mode.

Set billing codes

The billing-code setting, when enabled, prompts the user to enter a number when sending a fax. This

number is placed in the billing-code report. To view the billing-code report, either print the report or

query it by using an application.

ENWW

Fax settings 21

Summary of Contents for CC487-91209









































































































































































Search results

Summary of Contents for CC487-91209

Reviews:

HP CC487-91209, Fax Manual, Page: 33 / 168

Search results

Summary of Contents for CC487-91209

Reviews: