manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 102 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 102

3.

Touch one of the following options:

●

Job Build off

 (default)

●

Job Build on

4.

Touch the 

Save

 button.

Blank page suppression

Use the Blank page suppression feature to prevent blank pages in a fax from being printed.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Default Job Options

●

Blank Page Suppression

3.

Touch one of the following options:

●

Disabled

 (default)

●

Enabled

4.

Touch the 

Save

 button.

Billing codes

Set billing codes

The billing-code setting, when enabled, prompts the user to enter a number when sending a fax. This

number is placed in the billing-code report. To view the billing-code report, either print the report or

query it by using an application.

Billing codes are disabled by default. Follow these steps to enable billing codes:

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Send Settings

●

Fax Send Setup

●

Billing Codes

3.

Touch the 

Enable Billing Codes

 feature to enable billing codes.

NOTE:

To disable billing codes, deselect the 

Enable Billing Codes

 feature, touch the 

Save

button, and then skip the remaining steps.

To allow users to edit billing codes, touch the 

Allow users to edit billing codes

 feature.

90 Chapter 3   HP Color LaserJet CM 4540 MFP Series, HP Color LaserJet Enterprise M4555 MFP

Series, HP LaserJet Enterprise 500 MFP Series, HP LaserJet Enterprise 500 Color MFP Series,

and HP LaserJet Enterprise M725 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments