manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 105 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 105

Set ring frequency

NOTE:

The default ring frequency covers a broad frequency range, and should rarely require

adjustment.

1.

From the Home screen, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Fax Settings

●

Fax Receive Settings

●

Fax Receive Setup

3.

Touch the box beneath the 

Ring Frequency

 heading to open the keypad.

4.

Enter a value for the ring frequency on the keypad, and then touch the 

OK

 button. The default

setting for ring frequency is 68 hz.

5.

Touch the 

Save

 button.

Advanced image processing settings

Use the advanced image settings to enhance scanned images in several ways. The following settings

can be adjusted:

●

Adjust sharpness

●

Erase edges

●

Automatic color detection

●

Automatic page cropping

●

Automatic image orientation

●

Automatic tone adjustment

Adjust sharpness

Adjust the Sharpness setting to clarify or soften the image. For example, increasing the sharpness

can make text appear crisper, but decreasing it can make photos appear smoother.

1.

From the Home screen, touch the Fax button.

2.

Complete the fields on the first screen to specify the fax recipient information.

3.

Touch the More Options button at the bottom of the screen.

4.

Touch the Image Adjustment button.

NOTE:

If the Image Adjustment button is not on the first page of options, touch the More

Options button again to scroll to the next page.

5.

Adjust the Sharpness slider to the left to decrease the sharpness, or adjust it to the right to

increase the sharpness.

ENWW

Fax settings 93

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments