manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 42 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 42

Default job options

The following default job options are available for configuration:

●

Notification

●

Stamp Received Faxes

●

Fit to Page

●

Paper Selection

●

Output Bin

●

Sides

NOTE:

Default job option settings are shared across all fax methods; analog, LAN, and internet fax.

Change notification settings

Notification selects when and how you are notified of the status of an outgoing fax. This setting

applies to the current fax only. To change the setting permanently, change the default setting.

1.

On the control panel, touch the 

Fax

 icon to open the Fax screen.

2.

Touch 

More Options

.

3.

Touch 

Notification

.

4.

Select a notification setting:

●

Touch 

None

 to turn off notification.

●

Touch 

This job

 to enable notification for the current job.

●

Touch 

On error

 to enable error notification only for the current job.

5.

Touch 

Print

 to receive a printed notification, or touch 

E-mail

 to receive an e-mail notification.

6.

If you selected 

Print

, touch 

OK

 to complete the notification setup.

-or-

If you selected 

E-mail

, use the keyboard to type an e-mail address. Then touch 

OK

 to complete

the notification setup.

Stamp received faxes (incoming faxes)

The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the

received date, time, phone number, and page number on each incoming page.

1.

On the control panel, scroll to and touch the 

Administration

 icon to open the Administration

menu.

2.

Touch 

Default Job Options

 and then 

Default Fax Options

.

3.

Touch 

Fax Receive

 to see the Fax Receive setting.

4.

Touch 

Stamp Received Faxes

 to see the settings.

30 Chapter 2   HP Color LaserJet CM3530 MFP Series

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments