manualshive.com logo in svg

HP CC487-91209, Fax Manual, Page: 150 / 168

Share
Download
HP CC487-91209 Fax Manual Download Page 150

Environmental Product Stewardship Program

Protecting the environment

Hewlett-Packard Company is committed to providing quality products in an environmentally sound

manner. This product has been designed with several attributes to minimize impacts on our

environment.

Plastics

Plastic parts over 25 grams are marked according to international standards that enhance the ability

to identify plastics for recycling purposes at the end of the product’s life.

Material restrictions

This HP product does not contain added mercury.

This HP product does not contain a battery.

Disposal of waste equipment by users

This symbol means do not dispose of your product with your other household waste. Instead, you

should protect human health and the environment by handing over your waste equipment to a

designated collection point for the recycling of waste electrical and electronic equipment. For more

information, please contact your household waste disposal service, or go to: 

www.hp.com/recycle

.

For more information

To obtain information about these environmental topics:

●

Product environmental profile sheet for this and many related HP products

●

HP’s commitment to the environment

●

HP’s environmental management system

●

HP’s end-of-life product return and recycling program

●

Material Safety Data Sheets

Visit 

www.hp.com/go/environment

 or 

www.hp.com/hpinfo/globalcitizenship/environment

.

138 Appendix C   Regulatory information

ENWW

Summary of Contents for CC487-91209









































































































































































Reviews:

No comments