Foma D704i, Manual

Page: 467 / 498

14
2 Click
切断
(Disconnect)
Optimizing packet communication setup
Optimize the PC packet communication setup for
FOMA network by means of “Optimization of the
communication settings”. “Optimization of the
communication settings” is a TCP parameter tuning
tool for optimizing TCP/IP transmission capacity
during packet communication in the FOMA network.
To enable communication capability of the FOMA
terminal to maximum extent, this optimization of the
communication settings is required.
System optimization can be performed for each
dialup connection.
1
Start
FOMA PC
設定ソフト
(
☛
P8)
z
Click
通信設定最適化
■
Starting from the task tray: Click
2
Perform the following operations:
■ When the system has not been optimized:
The following screen is displayed.
a
Select
FOMA
端末（受信最大
384kbps
）
(FOMA terminal (Maximum reception:
384kbps)) and click
最適化を行う
b
Select the dialup connection to be
optimized
z
Click
実行
(Execute)
Optimization of the system settings and
dialup settings are performed respectively.
■ When the system has been optimized:
The following screen is displayed. Change the
check box and click
実行
(Execute) if changes
are to be made.
3 Reboot the PC following the instruction
shown on the screen
･
The settings take effect after rebooting the PC.
1 Start
FOMA PC
設定ソフト (
☛
P8)
z
Click
通信設定最適化
■ Starting from the task tray: Click
2 Click 最適化を行う
3 Reboot the PC following the instruction
shown on the screen
･
The settings take effect after rebooting the PC.
Canceling optimization
･
Cancel optimization in case of executing 64K data
communication or when communicating via other
than the FOMA terminal.
1
Start
FOMA PC
設定ソフト
(
☛
P8)
z
Click
通信設定最適化
■
Starting from the task tray: Click
For Windows XP
For Windows 2000
For Windows XP
Next
▲
D704i_E_Manual.fm 14 ページ ２００７年７月１２日 木曜日 午後１２時２７分