Foma D704i, Manual

Page: 75 / 498

73 Voice/Videophone Calls
1
m5
during a call
z
Set each item
z p
･
For setting each item (
Display setting
,
Sub screen
,
Screen size
and
Display light
), see “Changing the
videophone settings”.
☛
P73
Changing the videophone settings
Videophone Settings
Set the operation to be performed when a videophone call is not connected, the screen to be displayed
during a videophone call, etc.
･
The setting of
Auto redial as voice
ensures access to the other party. By setting this function to
ON
, a dialed
videophone call will be automatically redialed as voice call if the other party’s terminal does not support the
videophone function or cannot receive the videophone call while using the mova service through Dual
Network Service. Redialing does not occur, however, if you call an ISDN synchronized 64K or PIAFS
access point, or an ISDN videophone incompatible with 3G-324M (as of July 2007), or if you dial the wrong
number. Note that some calls may require the call charge.
1
m8513 z
Set each item
z p
INFORMATION
●
Even when
Auto redial as voice
is set to
ON
, redialing may not be performed depending on the situation of the other party
or the network.
●
When
Auto redial as voice
is set to
ON
, if you make a videophone call during a packet communication with a PC
connected, the call is redialed as voice call without connecting to the videophone. During a voice call or 64K data
communication, the call is not connected to the videophone and redialing is not performed, either.
●
If redialing as voice call occurs with
Auto redial as voice
set to
ON
, voice call charges apply instead of digital
communication charges.
●
When you talk by videophone while the Flat-plug Earphone/Microphone with Switch (optional) is connected, the voice
sounds from the connected earphone/microphone regardless of the setting of
Speakerphone
.
●
If a videophone call is made to emergency numbers (110, 119 or 118) from the FOMA terminal while
Auto redial as voice
is set to
ON
, the call is automatically switched to a voice call.
Setting the screen displayed during a call
Videophone Settings during a call
Default Display setting: Both sides Sub screen: My side Screen size: Large Display light: Always on(normal)
Default
Auto redial as voice: OFF Display setting: Both sides Sub screen: My side Screen size: Large
Visual preference: Normal Display light: Always on(normal) Speakerphone: ON
Auto redial as voice
：
Sets whether to redial as voice call automatically when a videophone call is not connected.
Display setting
：
Specifies whether to display either your image or the other party’s image or both
images during a videophone call.
Sub screen
： Specifies whether to display your image or the other party’s image on the sub screen
during a videophone call.
Screen size
：
Sets the main screen view size.
Visual preference
：
Sets the quality of image sent from the other party.
Display light
：
Sets the display light during a videophone call.
･
When
Terminal settings
is set, the setting of
Display light time
(
Normal use
) in Display
Light Setting (
☛
P114) applies.
Speakerphone
： Specifies whether to turn on the speakerphone function automatically once a videophone
call is connected.