Foma D704i, Manual

Page: 340 / 498

338 Other Convenient Functions
INFORMATION
● Even if Auto Power OFF is set to
ON
, when the specified
time arrives while the FOMA terminal is in any mode except
standby, the power is not turned off. The power is turned off
after the running function completes each job. However, if
the specified time arrives while the terminal security code
entry screen is displayed following the standby display or
the PIN1 code or PIN2 code entry screen is displayed when
the FOMA terminal is turned on, the power is turned off.
● Besides turning off the FOMA terminal, set Auto Power
ON to
OFF
in areas where mobile phone use is
prohibited, such as in hospitals, medical facilities and
airplanes.
Alerting with alarms after the specified
time period has passed
Timer
1 Enter time period
z r
or
m1
The countdown screen of the timer appears and
countdown starts.
･
Enter the period from 1 to 60 minutes. For 1 to
9 minutes, do not enter the preceding zero(0).
･
Countdown continues even if a call arrives or
b
is pressed to start another function during
countdown.
･
If you press
c
or
f
during countdown, a
confirmation screen appears asking whether to
stop countdown. Countdown continues even
while the confirmation screen is displayed.
After the specified time has passed
1 The alarm sounds
2
f
to stop the alarm
The standby display reappears.
･
Also the alarm stops when a minute passed
without any operation or any key or button
other than
f
or
k
is pressed.
*1 Sending/Receiving by packet communication is
excluded.
Ringing the alarm clock at the set time
Alarm Clock
Setting the alarm clock time and sound
･
When Alarm Clock is on, the default settings are
as follows;
Time: 00:00, Repeat: None, Snooze: ON
Alarm sound: Terminal setting, Volume: Terminal
setting, Vibrate alert: Terminal setting, Light pattern:
Terminal setting, Light color: Terminal setting.
･
Up to 9 alarms can be set.
1
m73 z 1
-
9
･
is displayed on the left of the title of the
alarm set.
■ Canceling: Highlight a title from the alarm
clock list
z m
･
To set the canceled alarm again: Repeat
the same procedure
2 Set each item
Time
：
Set the time to automatically turn the power
on.
･
Enter the time in the 24-hour clock. For
single-digit hours or minutes, precede the
digit with zero(0).
Repeat
：
Set Auto Power ON to repeat.
The alarm ( アラーム・メ
ロディ (Alarm, melody))
sounds at the volume set
for the call alert volume,
and the Enter key flashes.
If the vibrator is set for
incoming calls in Vibrator
Setting, it operates
according to the setting.
Alarm indication while another function is
being used
Function Alarm indication
During a call A warning tone sounds. The Enter
key does not flash and the vibrator
does not work.
On-hold The above operation takes place
after the end of the on-hold state.
During data
transfer*
1 , while
dialing, calling,
receiving or
terminating a call
The alarm is issued after the end
of the operation in the left column.
･
If the schedule data is received via
data communication, the schedule
does not operate when the
scheduled date and times comes.
Default not set
Time
：
Enter the time to set an alarm.