Foma D704i Manual Download Page 123

Page: 123 / 498

121

Sound/Screen/Light Settings

INFORMATION

●

When

Sync melody

is highlighted on the selection screen for the lighting pattern, the Enter key flashes.

●

When

Alert setting

is set to

Same:Mail setting

in Chat Mail Alert,

Incoming Chat Mail

cannot be set.

●

When

Sync melody

is set for the lighting pattern, the Enter key may not light/flash depending on the melodies.

●

Even when

IC card

is set to

, the Enter key may not light while Osaifu-Keitai compatible i-

ppli is activated.

●

Even when

IC card

is set to

, if the power is turned off, the Enter key does not light.

●

When

IC card

is set to

, the Enter key flashes when holding up the FeliCa mark to the reader/writer. The Enter key also

flashes when the FeliCa mark is held over the reader/writer in which Osaifu-Keitai compatible i-

ppli is not registered.

●

Even when

Easy selector plus

is set to

, except during talking or charging, lighting by rotating the Easy Selector Plus is

unavailable while the Enter key is lighting/flashing.

●

The setting of this function is reflected to the following settings:

･

Call Alert, Videophone Alert

☛

P96

･

Mail Alert

☛

P96

･

Chat Mail Alert

☛

P97

･

Message Alert

☛

P97

･

ToruCa Alert

☛

P97

･

Settings for melody

☛

P294

Flashing the Enter key when receiving new information

Indicator Light

The Enter key flashes when there is new information such as missed calls, unread mails, unread

Message R/Fs, etc.

m826

INFORMATION

●

Even when

is set, the Enter key does not flash in the following cases:

･

While receiving a call

･

While talking

･

In Public mode (Driving mode)

･

During All Lock

･

While activating the camera/Sound Recorder

･

While the Enter key is lighting (excluding the cases where the Enter key is lighting when opening/closing the FOMA

terminal, operating the Easy Selector Plus or charging)

●

When

is set, if about 6 hours have passed since the last arrival of new information or if

on the standby display is cleared, the Enter key stops flashing even if the information has not been confirmed.

●

When

is set, the Enter key flashes at about 6 second intervals in the lighting color set in each of the following

settings. It does not conform to the setting of Alert by Contact or Alert/Image by Group. If new information has been

confirmed, flashing stops.

･

Missed calls (voice call/videophone call/recorded message):

Incoming call

in Light Alert Setting

･

Unread messages (mail/chat mail/SMS):

Incoming Mail

in Light Alert Setting

･

Unread messages (Message R/Message F):

Incoming Message R/Incoming Message F

in Light Alert Setting

●

When

is set and there are multiple newly arrived information, the Enter key flashes in the color according to the

following priority.

Priority of lighting

In case the lighting is set in multiple functions, the Enter key lights/flashes by priority given below:

Alert by Contact of the FOMA terminal phonebook

Alert/Image by Group of the FOMA terminal phonebook

Light Alert Setting

Default

Missed calls (voice call/videophone call/recorded message)

Unread messages (mail/chat mail/SMS)

Unread messages (Message R)

Unread messages (Message F)

Summary of Contents for D704i



















































































































































































































































































































































































































































































































Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands

Foma D704i, Manual

Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands