Foma D704i, Manual

Page: 243 / 498

241 i-
α
ppli
Displaying the history when auto starting of
i-
α
ppli fails
Start Failure History
If automatic start of i- α ppli fails, appears on the
standby display and the i- α ppli name, the date and
time and the failure reason are recorded.
･
Up to 20 start failures are recorded. When the
number of recorded failures exceeds 20, the
oldest one is deleted.
･
When you display the start failure history or when
the next automatic start is successful, on the
standby display disappears.
1
m331
■ Deleting the history:
p
on the log display
screen
z
Yes
Starting i-
α
ppli from sites or mails
i-
α
ppli To
1 Select a link item enabled to start i-
α
ppli
from sites or i-mode mails
z
Yes
i- α ppli is started.
INFORMATION
●
If the i-
α
ppli you attempt to start with i-
α
ppli To is not
saved in the FOMA terminal, it cannot be started. Note
that some i-
α
ppli applications may start just after
downloaded from sites even if it is not saved.
●
If the specified i-
α
ppli is set not to start with i-
α
ppli To, it
cannot be started.
☛
P234
Operating the i-
α
ppli standby display
i-
α
ppli Standby Display
When i-
α
ppli is set for the standby display, you
can start and operate i- α ppli from the standby
display. On the i-
α
ppli standby display, or
is indicated at the top of the screen.
･
It is necessary to set i-
α
ppli for the standby
display beforehand.
☛
P108
INFORMATION
●
When you set i-
α
ppli that performs communication, it
may not operate correctly depending on signal
conditions, etc.
● While All Lock, PIM Lock, Privacy Mode (with
i-
α
ppli
set
to
Authorized access
) or Omakase Lock is active, the
i-
α
ppli standby display will be canceled temporarily. If
you cancel All Lock, PIM Lock, Omakase Lock, or
Privacy Mode, the i-
α
ppli standby display restarts.
●
If the use of i-
α
ppli set to the i-
α
ppli standby display is
stopped by IP, the i-
α
ppli standby display is canceled.
●
If an error occurs and a confirmation screen appears
asking whether to cancel the i-
α
ppli standby display,
select
Yes
to cancel it. At this time, the name of i-
α
ppli
and date/time are recorded in Abnormal Exit History.
●
You cannot connect to a site (Web To) from the i-
α
ppli
standby display.
●
When the power of the FOMA terminal is turned on with
the i-
α
ppli standby display set, a confirmation screen is
displayed asking whether to start the i-
α
ppli standby
display. When you select
Yes
or operate nothing for
about 5 seconds, the i-
α
ppli standby display starts.
When you select
No
, the i-
α
ppli standby display setting
is canceled. When the power is turned on by Auto Power
ON, the i-
α
ppli standby display automatically starts,
without displaying the confirmation screen.
Starting i-
α
ppli of the i-
α
ppli standby display
1
c
on the i-
α
ppli standby display
The screen is switched to the i- α ppli screen and
or blinks at the top of the display.
Quitting i-
α
ppli to return to the i-
α
ppli standby
display
1
f
while i-
α
ppli is running
z
End
i-
α
ppli terminates and the i-
α
ppli standby display
returns.
･
The procedure to quit i-
α
ppli and return to the
i-
α
ppli standby display depends on the type of
i-
α
ppli.
･
Even if
End
is selected, the i-
α
ppli standby
display setting is not canceled. To cancel,
select
Cancel
.
INFORMATION
●
You can also cancel the i-
α
ppli standby display by
highlighting the i-
α
ppli of the i-
α
ppli standby display in
the software list, pressing
m
, selecting
i-
α
ppli display
and then selecting
Cancel
.
Displaying the exit history of the i-
α
ppli standby
display
Abnormal Exit History
When an error that will cancel the i-
α
ppli standby
display occurs, the i-
α
ppli name, date and time are
recorded.
･
Up to 20 abnormal exits are recorded. When the
number of recorded abnormal exits exceeds 20,
the oldest one is deleted.
･
In the normal end, exits are not recorded.
Next
▲