Foma D704i, Manual

Page: 379 / 498

377 Network Services
INFORMATION
● Even if
Arrival call act
is set to any of the above, calls will
be recorded in the received call history.
Setting Remote Control
Remote Control
This service allows you to control Voice Mail
Service or Call Forwarding Service from touch-
tone general subscriber phones, payphones or
DoCoMo mobile phones.
1
m8762
2
Perform the following operations
Using Multi Number
Multi Number
Up to 2 additional numbers (
Additional No1
and
Additional No2
) can be used besides
Basic Number
for the phone number of your FOMA terminal.
･
If you pull out the UIM or replace it by another
UIM, the settings of name or phone number for
Multi Number saved in the FOMA terminal may
be deleted. In this case, you can register them
again.
･
The names corresponding to the multi-numbers
(
Basic Number/Additional No1/Additional No2
) are
displayed on the screen while you are dialing/
receiving calls.
･
When you make a call from the redial data or
received call history, the multi-numbers which
have been used for the previous incoming/
outgoing calls are displayed and you make the
call from the numbers.
1
m8767
2
Perform the following operations
Making calls by selecting the number to notify
the other party
When making a call, you can select the number you
want to show to the other party.
･
When
Multi number call
is set to
Disable
in
Number
Setting
, multi-numbers cannot be selected.
1 Enter a phone number
z m4
･
To make a call from the redial data:
r z
Highlight a party
z m3
･
To make a call from the received call history:
l z
Highlight a party
z m3
Set arrival act;
Activate
Activate the response method selected by
Arrival call act
.
81 z
Yes
Set arrival act;
Deactivate 82 z
Yes
Set arrival act;
Check setting 83 z
Yes
Item Operation procedure
Activate
1 z
Yes
Deactivate 2 z
Yes
Check setting
3 z
Yes
Item Operation procedure
Item Operation procedure
Set Multi
Number
You can set a number for making calls by
switching multi-numbers in this setting.
1 z 1
-
3 z
Yes
Check setting
2 z
Yes
Number
Setting
Basic
Number:
基本契約番号 /my
phone number
Additional No1:
付加番号 1/
Not recorded
Additional No2:
付加番号 2 /
Not recorded
Multi number
call: Disable
Set the phone number subscribed to Multi
Number.
3 z
Set each item
z p
Name
:
Setting is available for each
Additional
No1
/
Additional No2
(up to 20 one-byte
or 10 two-byte characters). For
Basic
Number
, the name set in Own Number
is displayed.
Phone number
:
Set the subscribed phone number in
Additional No1
/
Additional No2
.
Multi number call
:
If set to
Enable
, you can make a call by
selecting the number to be shown to
the receiver from the submenu.
Incoming calls
melody setting
OFF
Set the ring alert etc. for each additional
number.
4 z 1
or
2 z
Set each item
z p
Individual setting
:
Select whether to set the incoming call
setting individually.
Ring alert, Show image
:
Setting procedure
☛
P96
Default
Default
Next
▲