Foma D704i, Manual

Page: 242 / 498

240 i-
α
ppli
Starting i-
α
ppli with Two-key Shortcut
Two-key Shortcut
Registering i-
α
ppli to Two-key Shortcut
･
Up to 10 i- α ppli applications can be registered.
1
d
(for over a second)
z
Select a folder
2 Highlight an i-
α
ppli
z m92
･
To cancel, repeat the same procedure.
3 Select the number to register
･
The icon numbers ( - ) correspond to dial
keys
0
to
9
to be pressed to start Two-
key shortcut.
･
When you select a dial key that has already
been assigned an i-
α
ppli application, a
confirmation screen appears asking whether to
overwrite it.
Starting i-
α
ppli with Two-key Shortcut
1
0
-
9 z d
(for over a second)
Displaying the Two-key Shortcut list
1
m326
･
To start: Select an i- α ppli
･
To display details: Highlight an i- α ppli
z p
･
To cancel registration: Highlight an i-
α
ppli
z
m2 z
Yes
Automatically starting i-
α
ppli
Select whether to use auto starting and set
different auto starting conditions for each i-
α
ppli.
Setting whether to start automatically
Auto Start
1
m322 z 1
or
2
Setting the date and time of auto starting
Auto Start Info Setting
Set Auto Start on/off or the start time for each i- α ppli
and display the preset details.
･
The conditions that can be set depend on i- α ppli.
･
Some i- α ppli applications may not be started
automatically.
･
When Auto Start is set to
OFF
, this setting is not
available.
1
d
(for over a second)
z
Select a folder
2 Highlight an i-
α
ppli
z m6 z
Set
each item
z p
INFORMATION
● Even when auto starting is set, i- α ppli does not start in
the following cases. appears on the standby display
and the case is recorded in the Start Failure History.
･
When a screen other than the standby display is
displayed
･
When the UIM restricts operation (except for
preinstalled i- α ppli)
･
When the UIM cannot be detected
･
When the interval of auto starting is too short
･
When All Lock, Omakase Lock (Remote Lock), PIM
Lock or Privacy Mode is on (with
Authorized access
set
to
i-
α
ppli
)
･
When i- α ppli usage is stopped by the IP
●
When 2 or more i-
α
ppli applications are specified to start
automatically at the same time, only one i- α ppli is
activated. The failed i-
α
ppli information is recorded in
Start Failure History, but does not appear on the
standby display.
Default Not recorded
Default ON
User
：
Select whether to set conditions of Auto
Start.
Time
：
Enter the time to automatically start i-
α
ppli.
Repeat
：
Set the condition for repetitive automatic
starting of i-
α
ppli.
Weekly
：
Set the day of week for auto starting when
Weekly
is set for
Repeat
.
Date
：
Set the date for auto starting when
Onetime
is set for
Repeat
.
Software
：
Set whether to automatically start at the
intervals preset for i-
α
ppli.
i
-
α
ppli 1
to
4
：
Depending on i-
α
ppli DX, up to 4 conditions
of Auto Start can be set while it is operated.
Set whether to enable the settings.