Foma D704i, Manual

Page: 355 / 498

353 Other Convenient Functions
■
Resetting the total call cost:
p
on the call
cost screen
z
Enter the PIN2 code
z
Yes
INFORMATION
●
The cost for sending Chaku-moji is not counted.
● The call cost for the international call services is not
counted, except for WORLD CALL.
● No last charge information appears as “
＊＊＊＊＊＊
YEN”.
●
When you switch between the voice and videophone
calls during a call, the last call cost shows the total
amount of each call respectively. During switching, no
call cost is required.
●
When the last or total duration of voice/videophone call
or data communication exceeds 9,999 hours 59 minutes
59 seconds, counting is restarted from 0 seconds.
● When the FOMA terminal is turned off, the last call duration is
stored, but the last call cost is displayed as “ ＊＊＊＊＊＊ YEN”.
● The duration of receiving a call and ringing time are not
counted.
● The call duration and communication fee is not counted
for i-mode and packet communication. For details of
those usage fees, see “Mobile Phone User’s Guide
[i-mode]” you received when you subscribed to the
i-mode service.
Resetting the call cost automatically
Reset Call Cost
Total call cost is set to zero automatically on the
1st day of each month.
1
m86724
2 Enter the terminal security code
z 1
･
To cancel: Enter the terminal security code
z
2
3 Enter the PIN2 code
INFORMATION
●
Even if the setting is
ON
, the setting is canceled when
the UIM different from the one used during the setting is
inserted and then turn the power on. It doesn’t return to
the previous setting even if the UIM used when setting it
is inserted again.
●
When the setting is
ON
, the call cost will be reset if you
change the date and time to the next month in Date and
Time Setting.
●
When the setting is
ON
, if the terminal is not turned on or
you are talking on the terminal at 00 o’clock of the first
day of the month, a reset will take place when you turn
the power on or end the call.
●
If the setting is
ON
, the PIN2 code is required to turn the
power on and the terminal security code is required to set
the date and time.
Setting to notify the limit of call cost
Call Cost Limit
Set the maximum limit of call cost. An alarm or
icon alerts you that the total call cost exceeds the
set amount.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
1
m86722
2
Enter the terminal security code
z
Set
each item
z p
Last call cost: Voice
：
The cost of the last voice call
Last call cost: VP
：
The cost of the last videophone call
Last call cost: Data
：
The cost of the last data communication
Total calls cost
：
The total cost of voice/videophone call and
data communication
Reset: day & time
：
The last date and time when
Total calls cost
was reset
Default OFF
Default Alert: OFF
Alert
：
Set whether to notify when the total call cost
exceeds the set amount.
Limit
：
Set the maximum amount of call cost (10 to
100,000 yen, 10 yen unit).
Alert method
：
Select the alarm with icon or the icon only.
Alert sound
：
Select an alarm sound from the melody list
when
Sound + icon display
is selected in
Alert
method
.
･
Playing and checking a melody when
selecting
☛
P99
Alert time
：
Specify how many seconds alarm sound
should ring (1 to 60 sec.). Available when
Sound + icon display
is selected in
Alert
method
.
Next
▲